Cinnamon Teal or cinnamon teal in the east?

**UPDATE 30 September 2020**

I added a few new photos:

6a - photo of the Toronto bird flapping which confirms it as an adult male

19-21 - three photos of a different bird at Forest (Lambton Co.)

Introduction

Last Saturday, while conducting our Great Canadian Birdathon (still looking for donations - we've already raised over $10,000 for bird conservation!) we came across a distinctly "cinnamon" teal just outside of Rondeau Provincial Park, Ontario. We quickly got the word out and subsequently lots of people had a chance to look for it. Since then I've been trying to figure out whether it was indeed a Cinnamon Teal or maybe just a cinnamon teal. This post is an attempt to assemble all the information I have along with photos from a variety of people (thanks to them all for sharing!).

I'll post a bit of back-story, then photos of some different birds that have been seen in Ontario this fall, followed by some discussion. Please leave comments here or if you're on Facebook on this thread at Advanced Bird ID.

Cinnamon Teal status in Ontario

Cinnamon Teal is a very rare bird in Ontario. Prior to 2020 there were 19 records accepted by the OBRC dating back to 1983. Five of those come from northwestern Ontario (Rainy River and Thunder Bay Districts) and the rest are from southern Ontario. The seasonal distribution (based on first observation) is:

Spring (18 April-11 June) plus an outlier of 4 March - 13 records

Fall (17 November-8 December) - 2 records

Summering records (4 records)

1. 28 May-9 July 1983 (pair, nest with eggs)
2. 23 June-21 July (pair, but the female died)
3. 1 July
4. 27 May-23 June

In my opinion, there is a huge gap in records in August-September (no records!) when they are exiting the northern breeding grounds. This is also the time of year when southern Ontario sees by far the biggest concentrations of Blue-winged Teal. Blue-winged Teal is a former common breeder in Ontario but has declined significantly to the point it barely breeds in most parts of the province and I assume at least some of the flush of birds we see here in August and September come from the west. 

This gap in records is evident not just in Ontario, but throughout the east.

So why the gap in records? It must be an issue with identification. Females are much harder to separate from Blue-winged Teal (the only records in Ontario of females are of birds paired with basic-plumage ("breeding plumage") males). In August to September, male Cinnamon Teal will be in alternate plumage ("non-breeding" or "eclipse" plumage) so much harder to identify.

Fall 2020 reports

Toronto - August 31, 2020

The story starts at the end of August when Paul Prior found a similar bird in Toronto. He posted it along with photos as a possible Cinnamon Teal and Ron Pittaway sent photos to Peter Pyle in California. Peter replied that it looked fine for Cinnamon Teal and that the rusty breast is typical of adult females in alternate (eclipse) plumage and rules out  Blue-winged Teal. I can't speak for other birders, but I saw  those photos and thought that it really stuck out and gave me a search image to look for. Here are some of Paul Prior's photos taken August 31, 2020:

1. "cinnamon" teal at Toronto, August 31, 2020. Photo by Paul Prior.

2. "cinnamon" teal at Toronto, August 31, 2020. Photo by Paul Prior.

3. "cinnamon" teal at Toronto, August 31, 2020. Photo by Paul Prior.

4. "cinnamon" teal at Toronto, August 31, 2020. Photo by Paul Prior.

5. "cinnamon" teal at Toronto, August 31, 2020. Photo by Paul Prior.

6. "cinnamon" teal at Toronto, August 31, 2020. Photo by Paul Prior.

6a. "cinnamon" teal at Toronto, August 31, 2020. Photo by Paul Prior.

Outside of Rondeau Provincial Park (Chatham-Kent): September 19, 2020+

With the search image of a "BWTE with rusty tones" in mind, we (Ken Burrell, Mike Burrell, and Jim Burrel) found this bird on September 19, 2020. We couldn't manage good photos on the day we found it, but here are the best from subsequent days. We were also somewhat rushed as we were conducting a big day raising money for bird conservation. In the field, this bird stuck out as having really reddish tones concentrated in the breast, but extending down the flanks and into the undertail. We discussed the bill in the field as being slightly larger than the nearby Blue-winged Teal but not obviously massive. On September 20, 2020 a second bird was noted with the first as also having a reddish breast, but not as extensive reddish elsewhere on the body.

I sent some of these photos (of "both" birds) to Peter Pyle and Alvao Jaramillo for their opinion. Alvaro thought the first could be a Cinnamon Teal but had reservations about it, particularly the bill (I'm paraphrasing) but felt the second bird was more likely a rusty looking Blue-winged Teal.

Peter at first thought the more rusty bird looked fine for an adult male Cinnamon Teal (aged by evenly-shaped back feathers) and the rusty feathers could be left over from basic (breeding) plumage in spring. The second bird he thought also looked OK for an eclipse adult male (sexed based on large bill). After some back and forth with him where I asked about certain features (more on that below) he agreed that some things were inconsistent with a pure Cinnamon Teal. Note that as he pointed out it was hard to be sure which photos were of which bird. 

7. "cinnamon" teal at Chatham-Kent, September 20, 2020. Photo by Mourad Jabra

8. "cinnamon" teal at Chatham-Kent, September 20, 2020. Photo by Mourad Jabra

9. "cinnamon" teal at Chatham-Kent, September 20, 2020. Photo by Mourad Jabra

10. "cinnamon" teal at Chatham-Kent, September 20, 2020. Photo by Mourad Jabra

11. "cinnamon" teal at Chatham-Kent, September 20, 2020. Photo by Mourad Jabra

12. "cinnamon" teal (note second bird) at Chatham-Kent, September 20, 2020. Photo by Mourad Jabra

13. "cinnamon" teal at Chatham-Kent, September 22, 2020. Photo by Garry Sadler

14. "cinnamon" teal at Chatham-Kent, September 22, 2020. Photo by Garry Sadler

15. "cinnamon" teal at Chatham-Kent, September 23, 2020. Photo by Denise Dykema

16. "cinnamon" teal at Chatham-Kent, September 23, 2020. Photo by Denise Dykema

It should be noted that because there are at least two birds there with rusty breasts, I can't be totally sure all photos are of the same individual and I haven't been back to the site to make additional observations.

Forest (Lambton County) 

James Holdsworth, with the search image in mind, then found another teal with "cinnamon" colouring, this past week, this time at Forest Sewage Lagoons in Lambton and suggested that all these "cinnamon" teals were oddly-coloured Blue-winged Teal.

17. "cinnamon" teal at Lambton Co., September 24, 2020. Photo by James Holdsworth

18. "cinnamon" teal at Lambton Co., September 24, 2020. Photo by James Holdsworth

19. "cinnamon" teal (different from 17-18) at Lambton Co., September 24, 2020. Photo by Mark Buchanan

20. "cinnamon" teal (different from 17-18) at Lambton Co., September 24, 2020. Photo by Mark Buchanan

21. "cinnamon" teal (different from 17-18) at Lambton Co., September 24, 2020. Photo by Mark Buchanan

Discussion

So we're left with an unexpected flush of "cinnamon" teal associating with Blue-winged Teal right in the time of year when we could predict Cinnamon Teal should show up. But three records of four individuals seems pretty unlikely...

Some photos of clear-cut September US Cinnamon Teal from within their range:

Males

https://macaulaylibrary.org/asset/26555933

https://macaulaylibrary.org/asset/265491901

https://macaulaylibrary.org/asset/265414511

https://macaulaylibrary.org/asset/265235801

https://macaulaylibrary.org/asset/263264641

https://macaulaylibrary.org/asset/262197541

https://macaulaylibrary.org/asset/262141621 (full "eclipse")

https://macaulaylibrary.org/asset/179360691 (I think it's a male)

Females

https://macaulaylibrary.org/asset/265001021 (pair)

https://macaulaylibrary.org/asset/263291631

https://macaulaylibrary.org/asset/262583831

https://macaulaylibrary.org/asset/262064331

https://macaulaylibrary.org/asset/261703271

https://macaulaylibrary.org/asset/261419721

Plumage

Those rusty feathers are pretty extreme, especially on the Lambton and Chatham-Kent birds. Could it be staining? If not, it's hard to imagine a Blue-winged Teal showing that much rufous feathering left over from basic (breeding) plumage. And it's too early for them to be molting really - the only advanced in molt September bird I could find online was this one :)

Facial pattern

The facial pattern looks pretty bold to me, especially on the Lambton bird. The Chatham-Kent bird(s) is perhaps slightly more muted and the Toronto bird is best. But I don't think any of them are "perfect" for Cinnamon Teal; all show some pale at the base of the bill and a fairly pronounced eye stripe.

Sex

I haven't seen them, but apparently "flapping" photos exist of the Toronto bird to identify it as a male (as per Paul Prior). For the Chatham-Kent bird, the one in flight sure looks like a young female wing pattern, though I could be mistaken. I'm not sure about the Lambton bird.

Age

Age is tricky to assign with these photos. The only bird that has really good photos to see feather detail are some of the shots of the Chatham-Kent bird(s) but there is the caveat that we could be looking at different individuals in different photos. Peter Pyle aged the bird in photo 10 as an adult, possibly second year bird. The flight shots (15/16) seem to indicate a hatch year bird.

Eye colour

Adult male Cinnamon Teals should show an orange/red eye. It's surprisingly obvious. Some birds apparently can show a brownish eye in the summer but in my relatively quick search of the Macaulay Library I didn't see any obvious males with brownish eyes. Here's a "typical" male in September...I am confident that all of the birds here have brownish eyes. That's no big deal if we're dealing with females or hatch year birds, but I think it is a pretty big red flag if we're talking adult males.

Bill

Alvaro put it really well in his email to me, "I always joke that we have Blue-wing, and then the greater and lesser shoveler". And that bares out pretty well looking at photos, Cinnamon Teal has a pretty honkin' bill. Measurements given show a pretty big overlap and I wonder if the difference might be less on females or young birds, but to me none of these birds jump out as having a huge bill even with direct comparisons with Blue-winged Teal. They may be on the biggish end for Blue-winged Teal but not overly huge. However, scrolling through images on Macaulay Library you can find quite a range of variation in this feature in both species. 

Conclusion

Are Cinnamon Teal really this hard to pick out? Or are we just trying a bit hard here? Could these all be colour-stained Blue-winged Teal? Hybrids? The more I look at photos of Cinnamon Teal I wonder if the overall plumage colour is just a red herring! What does a hatch-year male Cinnamon Teal look like in September?

The whole point of writing this was to solicit opinions from people with experience separating the two...so, please leave your comments below or on the Advanced Bird ID thread.

Acknowledgements

Thanks to Alvaro Jaramillo and Peter Pyle for really quick and thoughtful responses to my initial and follow-up questions. Thanks to Paul Prior, Mourad Jabra, Garry Sadler, Denise Dykema, and James Holdsworth for allowing me to post their photos here. Steve Charbonneau helped round up the photos. And thanks to all the interesting discussion on these birds I've already read - look forward to reading more!

Promethea Moth love

As some of you know I have some lights up around my house for moths. This year, since I’m home all the time I’ve done more than usual and I’m also hoping to try rearing some caterpillars. The other day that I had a female Cecropia Moth and I kept her over night to see if she’d lay some eggs – she did and I’m patiently waiting for them to hatch.

Right now we’re in peak season for a lot of the big showy Giant Silkworm Moths and I had a female of another species, Promethea Moth show up at my light on Monday night:

Promethea Moth female (slightly bigger than a Monarch for size comparison)

So I captured her and put her in a paper bag overnight hoping for some eggs. She didn’t, so I gave her another night and still none, so I assumed she must not have mated yet. In most of the Giant Silk Moths, the females “call” by releasing pheromones to attract the males, which have an incredible ability to detect these pheromones from large distances (up to a kilometre!). In Promethea, the females call in a very specific time period between about four and six in the afternoon. So, the next day, I put her in a cardboard box with a screen lid. I checked on her several times but no males came. Yesterday, I did the same and was checking regularly…nothing. Then about 5:20 pm when I went outside there was a swarm of 5 or 6 males trying to get into the box! I lifted the lid and a male quickly flew in. Almost instantly she must have stopped calling because the other males dispersed very quickly.

Male Promethea Moth

Pair mating

After about 3.5 hours they uncoupled and the female laid a few eggs in the box. I let the male go and put her in a paper bag (easier to collect the eggs) and she laid some more eggs (total of about 34) by 10:30 pm when I let her go outside.

Promethea eggs

So, I’ve got some more eggs now that I’m hoping will hatch in a week or two! If you're curious about raising some yourself, I found this website which has some good info and photos: https://www.prairiehaven.com/?page_id=9857

Deluxe moth trap design

There's been a huge growth in interest in moths in Ontario over the last several years...the new Peterson Field Guide to Moths of Northeastern North America (by Ontario's David Beadle and Seabrooke Leckie!!) is certainly a huge factor in that. But there are lots of other important factors, too: there's excellent photo recognition now on iNaturalist (where a lot of Ontario moth-ers are reporting their sightings), the Toronto Entomologists' Association has their moth atlas (and associated Moth's of Ontario iNaturalist project) and of course there are excellent online resources for ID, in the form of Moth Photographers Group and Bug Guide.

You can just leave a light on outside your house or go one step further and buy a specialized bulb and/or set up a white sheet. Or you can build a trap. There are many designs out there and they all are basically a big container with a light source over a funnel. The most effective live trap I have seen is the one that Mary Gartshore and Peter Carson use. I'm not sure if they came up with the design or not (might have come from Mike King and/or David Beadle), but they shared the details with me so I could make my own...and I'm going to share that with you here.

The whole trap costs about $50-100 depending on how/where you get your supplies. Plus you'll need cords and a bulb.

Materials:
~18 gallon "Muck Bucket" - this is the base for the trap. They're sold mostly at hardware and feed stores. I got mine at a local agriculture supply store for about $25. Grainger Canada has them righ tnow for $18 online here.

18 gallon muck bucket

12 inch funnel. These are surprisingly hard to find. Phone around to brew your own beer or make your own wine stores. I ended up getting them at a wine store for about $10. These funnels are perfect because they're designed to sit over the mouth of a large bucket, so they have a small lip around the top edge.

12 inch funnel

Plexiglass. This is for the fins. You'll need two pieces that are about 11 x 11 inches each. I used 1/8 inch thick but 1/4 inch is recommended. I actually snapped my first piece accidentally...so the extra width will give you more strength especially as you weaken it with cutting. You can buy sheets at hardware stores and online on Amazon but you might be able to go to a local hardware store and ask if they have any scrap pieces big enough for you - that would be much cheaper (maybe even free).

Glass bowl. This is the rain cover and is optional if you don't plan on leaving your trap out in the rain ever, but I'd recommend it. Mary and Peter use a Pyrex #322 1 quart mixing bowl. I found something similar on Amazon for $5.

Light socket/cord. You can get this at any hardware store for a few bucks. The best is if you can find one with the cord/attachments coming off the side or off the bottom not perfectly in the centre because ideally you'll have it sitting flush along the bottom. I couldn't get in to a hardware store at the time so ordered this one from Amazon for $12. You can get the same thing off Amazon for much cheaper if you are going to order a few at a time. I was able to make this one work pretty well by unscrewing the plastic cover at the very bottom of the socket, giving a bit of flex to the cord right at the base. It wasn't perfect, but good enough.

Corrugated plastic: this is for the "lid" of the trap. The easiest thing is to find an old election sign but if you can't find one you can order them online from lots of places or you can check your local hardware and craft stores. You'll need a piece that's about 2 x 2 feet. (If you're local I have some extra sheets I could give you)

sheet of corrugated plastic

Margarine container and screen. This is for the drain and again could be omitted but is a good idea to include. I used some scrap window screen I had on hand (again, if you're local I can give you some).

Tools:
Sharpie
Exacto-knife
Glue gun
Something for cutting plexi-glass. I used a dremel tool with a plastic cutting wheel, but you could use any number of other tools. Theoretically you could use an exacto knife but I think you'd end up  A band saw would probably be the easiest.

Assembly:
1. Cut your corrugated plastic for the lid. Basically, trace the top of the muck bucket and then add ~10 cm around it and cut that circle. Then you'll want to line up the handles and cut slits for them. Finally, trace the top of your funnel on the centre of the sheet. Then follow that line about 1 cm inside to create a slightly smaller circle (the exact width should be close the width of the lip on your funnel). All of this can be cut with a sharp exacto knife. You may have to do some small adjustments to make sure the funnel fits properly. Once you're finished, the lid should look something like this:

The "lid" - sheet of corrugated plastic cut to size/shape

2. Cut the narrow part off your funnel. I used my dremel tool for this but an exacto knife would work too. You want to cut it so you leave an opening about two inches across.Mine is two inches exactly and that's big enough to catch the biggest moths we have in Ontario - I caught Cecropia, Luna and several sphinxes in the first couple nights.

Funnel with narrow neck cut off

3. Next you will make your drain. Take your margarine container and cut most of the bottom out of it. Next, cut a circle of screen to cover the bottom of the container and use the glue gun to attach it. Then, cut a hole in the centre of the bottom of the muck bucket and glue your margarine container (face down) over this hole. This should be centred properly so any water that drips down your funnel will fall onto the screen and drain down. By having the screen portion elevated you'll prevent moisture from coming back up.

Margarine container with bottom cut out

drain cover installed

Another look at the drain. There's a hole right through

4. Now it's time for the fins. Peter was good enough to provide me with his pattern on one inch grid paper:

Designs for the fins. This is one inch grid paper

It fit my funnel pretty closely, but I did have to adjust the sides a bit so it would fit fairly snugly. I also had to widen the notches in the top to fit my glass bowl (mine was slightly wider than the one they use). As I mentioned previously, I used a dremel tool to cut the pattern and then used a sanding attachment on the tool to make some fine adjustments. Especially the narrow part at the bottom (where the light socket goes) you want to be quite exact to match the width as close to perfectly as possible.

The fins are cut and sitting together in the funnel

5. Now your fins are cut, fit them together and make sure the fit snuggly in the funnel. You might have to do some back-and-forth here with sanding and fitting until they fit nicely. It's also important to check that the bowl fits on the top now (in the recessed spot created by the notches). You also need to do the same for your light socket to make sure it will fit snuggly in place. Once you're happy with how it all fits, you can glue it with the glue gun, using a bead along each line the two sheets touch.

6. Once the glue is cooled, fit your light socket in place and glue it again with copious amounts. You can then assemble everything and it should look something like this:

Close-up of the light socket glued in place

The finished product.

7. Before you run it, don't forget to fill it with egg cartons so the moths have somewhere they can hide and feel safe once they're stuck inside. Don't block the drain.

The trap all set with egg cartons

In the morning you should have a trap full of moths to look at :)

Bulb: you can use any bulb you like. Mercury Vapor bulbs (like the one pictured above) are the favourite of most moth-ers, but are getting harder and harder to find. If you've got a good lead on a place to find them, please let me know! I've got a few left from an eBay order last year.

Once last tip: if you've got a dusk til dawn outdoor timer that's a handy way to save on energy.

Again, I'd like to thanks Peter Carson and Mary Gartshore for the design of this trap - without their help I'd still be using a much less effective trap.

Ontario birder's guide to radar

There seems to be more and more interest in checking out bird migration live on weather radar maps. So I thought I'd put together a short post to compile some resources.

Seeing birds on radar is not at all new, but there are lots of great websites now for viewing live radar images (or radar loops). I'd recommend everyone who is interested in birds and radar check out eBird's primer.

The short explanation is that radar shoots out a signal, and what you see on radar maps is the reflection. It's mainly used by most people to view precipitation, but when migration is heavy, birds show up too. Here's a recent image from 1 May 2019 from the (US) National Weather Service website (my favourite site for viewing radar images for the entire US):

The above image is an instructive one - precipitation is showing up as blocky, irregular shapes, with very high reflectivity readings (yellows and some reds), and migrating birds are showing up virtually throughout the eastern US. Birds show up as donuts around the radar stations. This is because the radar is "shot" out at an angle, and most birds are all roughly the same height, so very close to the station no birds are getting "hit" (birds are higher), but further out, as the beam gets higher, birds are encountered. Eventually, as one travels farther away, the beam is too high and no longer reflects on any birds.

Here's a marked up version:

Here's a closer view of the Cleveland radar station, back from March 2014. This one comes from Weather Underground, another popular website for bird-radar enthusiasts. Note that I combined several images into a looping GIF to show the station before sunset, and then watching the birds appear in the sky:

The above image shows another characteristic of birds; the reflection increases, but doesn't appear to move. Watch the area above Detroit and you'll see a band of rain moving west to east. The birds just kind of fill the sky (some concentrations along the lake shore).

All of these images shows the reflectivity (higher reflection = brighter image = more birds), but at some weather outlets (including Weather Underground) you can also switch to view velocity, so you can see the direction and speed the birds are moving.

Now you might be wondering why I have only mentioned American radar products so far. The answer is that Canadian stations don't show bird migration very well. If you go to the Environment Canada Ontario Weather Radar page there's almost never any bird-like signals showing up, even when the American sites show heavy migration - what gives? I asked some Environment Canada staff and they told me that they do more processing of the data to eliminate weak signals (e.g. birds), and the Canadian Radar stations operate slightly different. Both give a better image if you really want to use the Radar for its intended purpose, but are bad news for birders.

the good news is that Weather Underground uses mostly unprocessed Radar data on their website, so, if for instance you want to watch for bird migration around Toronto, you can go to their website and select the King City station. If I were a betting man, I'd be betting the next two nights should show some pretty intense migration :)

How our past experiences influence our assumptions (geese)

I grew up in southwestern Ontario and not surprisingly, that biased my view on birds and their movements and populations in the province. I don't think there is a better example of this than my view of goose migration.

For most of my life, I thought seeing several hundred or even a thousand Canada Geese was a good flock. And sure enough, scrutiny of any "good-sized" flock (read: a few hundred) in my neck of the woods has a pretty good shot at turning up "something good", usually Cackling or Snow Geese or maybe if you're really lucky a Greater White-fronted or Ross's.

Big or small flock? Depends on where you're from! Spot the Cacklers?

My eyes were opened when I started hanging around this girl, Erica and her family's farm southeast of Ottawa. Turns out what I thought was a lot of geese was pretty sad. Not a day goes by in far southeastern Ontario during migration season when you can't easily find tens of thousands of geese in the air or in the farm fields.

My view of Ontario goose migration, like so many other southern Ontario-centric birders, was extremely flawed. Southeastern Ontario is on a huge goose flyway along the Atlantic coast. In recent years, as the Greater Snow Goose migration has increased in southeastern Ontario, awareness of this seems to be increasing, but still most Ontario birders really don't appreciate how different goose migration is in the southeast.

Greater Snow Geese near Cornwall

This really revealed itself to me while on the OBRC and the committee was discussing a record of Barnacle Geese outside of Ottawa. In short, I am of the belief that Barnacle Goose occurs as a natural vagrant in this part of the province but some people, largely because of their southwestern Ontario view of goose migration, disagree. So, I decided to compile some information...that spiraled a bit out of control and before I knew it I had a decent article for Ontario Birds.

Anyways, this is all to say that I am happy with an article I recently wrote for Ontario Birds. Here are a couple of figures to get you thinking:

Canada Geese banded in Greenland and recovered or re-sighted in Canada and the United States. Prepared using data obtained from the Canadian Wildlife Service Bird Banding Office.

You might notice a similarity with this:

Barnacle Goose reports in eBird for northeast US and Canada.

If you're an OFO member check out the article in the December issue of Ontario Birds. If you're not...why not? (email me and I can send a pdf)

Looking forward to hearing your feedback on this one!

How to Batch Upload iNaturalist Observations to a particular Project

How to Batch Upload iNaturalist Observations to a particular Project – in this case, the Canada 150 – Canada Day Biodiversity Challenge. Prepared by Colin D. Jones.

Step #1 – go to the relevant project page, in this case

http://inaturalist.ca/projects/canada-150-canada-day-biodiversity-challenge

and click on “Add from your observations”

This will search for and show any observations that meet the project’s criteria – see graphic below.

Step #2 – click on “Batch edit”

Step #3 – click on “Select All”

This will select all of the observations (see check in box to the left of each observation).

Step #4 – click on “Add to project”

This will bring up a window of all of the projects that you have joined.

Step #5 – click on “Add” next to the relevant project – in this case “Canada 150 – Canada Day Biodiversity Challenge”

That’s it – you’re done. All of these observation will now be added to the project.

If additional observations are added to iNaturalist later, the same process can be used to batch upload another set.